Proxmark3 Firmware Installation on Fedora

  1. Install dependencies

    sudo dnf install readline readline-devel libusb libusb-devel qt4-devel ncurses-devel arm-none-eabi-gcc arm-none-eabi-newlib pcsc-lite pcsc-lite-devel
    
  2. Install blacklist rules

    sudo cp -rf driver/77-mm-usb-device-blacklist.rules /etc/udev/rules.d/77-mm-usb-device-blacklist.rules
    sudo udevadm control --reload-rules
    
  3. Build

    make clean
    make all
    
  4. Then proceed with flashing.

comments powered by Disqus